Close Go back Collapse all sections
Process Data set: Aluminum electrolytic capacitor production ; winding ; Capacitor roll (en) en zh

Key Data Set Information
Location JS-CN
Reference year 2020
Name
Aluminum electrolytic capacitor production ; winding ; Capacitor roll
Use advice for data set When utilizing the inventory data in Life Cycle Assessments, ensure the inclusion of all input and output flows that account for at least 95% of the mass and energy according to the set cut-off criteria. The provided data is specific to AECs’ production within the reference years 2015 and 2016 for aluminum ingot production and Chinese electricity grid profile respectively. Adjustments may be required for studies reflecting different time frames or technological improvements. The inventory data for the upstream processes such as aluminum ingots, separator paper, and transportation, acquired from Gabi software, must be used with an understanding of the underlying assumptions and limitations. Where data was inaccessible, estimates based on chemical equations using existing materials in Gabi software were made; users must take into account these estimations' uncertainties. For use and end-of-life stage data, rely on methodological consistency with the inventory analysis and calculations provided.
Technical purpose of product or process The aluminum electrolytic capacitors (AECs) with a specification of 420V 680uf are used primarily within the electronics industry for applications such as power supply smoothing, filtering, or energy storage in various devices, where a stable and reliable capacitor is necessary for the operation. They are suited for high voltage and large capacity needs.
Classification
Class name : Hierarchy level
  • ILCD: Materials production / Metals and semimetals
General comment on data set 绕线 ; 铝电解电容器 (AEC) 生产 ; 420V 680uf
Copyright No
Owner of data set
Quantitative reference
Reference flow(s)
Time representativeness
Time representativeness description The investigated manufacturer produced about 1.183 billion AECs of all kinds in 2020.
Technological representativeness
Flow diagram(s) or picture(s)
  • MEqpbSngYoK3fvx38PMc1UOQnSd.png Image
LCI method and allocation
Type of data set Unit process, single operation
Deviation from LCI method principle / explanations None
Deviation from modelling constants / explanations None
Data sources, treatment and representativeness
Deviation from data cut-off and completeness principles / explanations None
Data selection and combination principles The inventory data of capacitor production come from the AECs’ production factory in Jiangsu Province, China. The cut-off criteria of LCI data collection for each process is coverage of at least 95% of the mass and energy of the input and output flows. The inventory data of anode foil production and cathode foil production is obtained based on the analysis of the manufacturing processes and corresponding process parameters. The upstream data (i.e., aluminum ingots, separator paper, transport, electricity, and water) are acquired from the Gabi software (Version: 10.6.1.35). In detail, the profile of Chineses electricity grid from the China Electric Power Yearbook adopts the reference year 2016. The reference year of aluminum ingot production is 2015. The inaccessible data about ammonium citrate, ammonium pentaborate, NH4H2PO4, and HBO3 are estimated based on chemical equations using the existing materials (reactants) in the Gabi software. The use and end-of-life stage inventory data are obtained based on analysis and calculation.
Deviation from data selection and combination principles / explanations None
Deviation from data treatment and extrapolations principles / explanations None
Data source(s) used for this data set
Completeness
Completeness of product model No statement
Validation
Type of review
Dependent internal review
Reviewer name and institution
Data generator
Data set generator / modeller
Data entry by
Time stamp (last saved) 2024-05-01T17:10:27+08:00
Publication and ownership
UUID 77588fb9-34f9-4906-9897-ecfb5aaae88b
Date of last revision 2024-05-13T14:41:28.668933+08:00
Data set version 01.00.005
Permanent data set URI https://lcadata.tiangong.world/showProcess.xhtml?uuid=77588fb9-34f9-4906-9897-ecfb5aaae88b&version=01.00.000&stock=TianGong
Owner of data set
Copyright No
License type Free of charge for all users and uses

Inputs

Type of flow Classification Flow Location Mean amount Resulting amount Minimum amount Maximum amount
Product flow
Energy carriers and technologies / Electricity 15.9984 MJ15.9984 MJ
General comment Electricity [kWh]
Product flow
Materials production / Metals and semimetals 27.226 m327.226 m3
General comment Anode formed foil [kg]
Product flow
Materials production / Metals and semimetals 9.524 kg9.524 kg
General comment Cathode etched foil [kg]
Product flow
Materials production / Paper and cardboards 7.016 kg7.016 kg
General comment Separator paper coil [kg]
Product flow
Materials production / Plastics 0.103 kg0.103 kg
General comment Tape [kg]
Product flow
Materials production / Metals and semimetals 0.07 m30.07 m3
General comment Tab [kg] ; CN: aluminium sheet in Gabi Database

Outputs

Type of flow Classification Flow Location Mean amount Resulting amount Minimum amount Maximum amount
Product flow
Materials production / Metals and semimetals 0.004 m30.004 m3
General comment Scraps of anode formed foil [kg]
Product flow
Materials production / Metals and semimetals 0.004 kg0.004 kg
General comment Scraps of cathode etched foil [kg]
Product flow
Materials production / Paper and cardboards 0.004 kg0.004 kg
General comment Scraps of separator paper [kg]
Product flow
Emissions / Metal and semimetal elements and ions 1000.0 kg1000.0 kg
General comment Elements(before soak) [pcs]